version 1.1
16
indicator
Telephone Line/GSM Personal Reporting Fail
indicator
Telephone Line Connection Fail
Remark: Zone 1, 2, 3 and 4 indicators will only be extinguished after the troubles are restored.
Zone 5, 6 and 7 indicators will be extinguished when they are viewed once.
[8]
(Press and hold down for 2 seconds)
1. The system alarm memory will store the most recent alarm condition. An alarm condition
will cause the MEMORY indicator to slow flash.
2. The MEMORY indicator will extinguish once the user enters VIEW ALARM MEMORY
mode.
3. Enter and hold down [8] key for 2 seconds.
4. The MEMORY indicator will turn ON and keypad audible indicator will sound 2 beeps.
5. One or more ZONE indicators will turn ON to indicate the zones that cause the most recent
alarm.
6. Press [#] key to exit and keypad audible indicator will sound 2 beeps.
The chime mode allows user to monitor nominated zones while the system is disarmed. The
audible indicator will sound briefly when the nominated zone is violated – the siren will NOT sound.
If you wish to know there is someone enters or exits the front door, the keypad will beep once when
the door is opened provided the zone is a chime zone.
[9] + [ZONE NUMBERS] + [#]
(Press and hold down for 2 seconds) (01 to 16)
1. Press and hold down [9] key for 2 seconds.
2. The POWER and KEYLOCK indicators will slow flash and keypad audible indicator will
sound 2 beeps.
3. To change any zone to chime zone, just press the key corresponding to that zone. The
zone indicator will illuminate constantly.
4. To enter zone number more than 9, press button [F] to represent the ten’s digit.
5. E.g. To enter zone number 12, press [F] + [2], zone number 16 press [F] + [6].
6. Press [#] key to exit the chime mode and keypad audible indicator will sound 2 beeps to
confirm the command.
e.g. To program zone 3 and zone 4 as CHIME zones:
Press and hold down [9] for 2 seconds + [3] + [4] + [#]
Keypad audible indicator will sound 2 beeps to confirm the command. Zone 3 and 4 are
now CHIME zones.
TO CANCEL CHIME ZONE:
Repeat the above steps and ensure that the zone indicator is extinguished.
FIRE MODE
[F]
(Press and hold down for 2 seconds)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales