version 1.1
10
[∗
∗∗
∗] + [USER CODE] + [#]
(Leave via ENTRY/EXIT Zone)
1. Ensure that all zone indicators are distinguished; if not, check that all protected premises
are closed.
2. Press the [∗
∗∗
∗] key to cancel any unintended entries.
3. Enter a valid 4-digit [USER CODE]. If you enter any mistakes, press [∗
∗∗
∗] key and re-enter
the code followed by [#] key to confirm you command.
4. The P1 indicator will illuminate and the keypad audible indicator will sound on and off for
the duration of the EXIT delay. Any bypassed zones will be shown by the flashing zone
indicators.
5. Leave the premises only via the EXIT/ENTRY zone.
6. During AWAY arming, the telephone line will be supervised hourly. If the telephone line is
disconnected, a new trouble condition will be registered (please refer to View System
Trouble at page 13).
7. User will be given an ENTRY delay time to disarm the system when enter the protected
premises via ENTRY/EXIT zone.
[1]
(Press and hold down for 2 seconds)
8. It is also possible to AWAY arm by simply enter and hold down [1] key for 2 seconds.
[2]
(Press and hold down for 2 seconds)
1. This arming mode is ideal for DAY time arming with user still remains in the protected
premises.
2. In this mode, the system will be armed instantly with certain preprogrammed, DAY STAY
zones bypassed automatically.
3. Ensure that all zone indicators are distinguished; if not, check that all protected premises
are closed.
4. DO NOT open the ENTRY/EXIT zone.
5. Enter and hold down [2] key for 2 seconds.
6. The P1 indicator will illuminate and the keypad audible indicator will sound 2 beeps to
confirm the arming.
7. Any DAY STAY zones will be automatically bypassed (shown by flashing zone indicators).
8. User will be given an ENTRY delay time to DISARM the system when enter the protected
premises via ENTRY/EXIT zone.
AWAY ARMING
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales