
version 1.1
15
8. To bypass all zones at once, enter [0] key followed buy [#].
9. Keypad audible indicator will sound 2 beeps to confirm the command and the system will
be back to normal mode.
10. The relevant ZONE indicator will slow flash to indicate that the zone is bypassed now.
11. Zones cannot be bypassed once the system is armed.
12. All bypassed zones will be automatically un-bypassed each time the system is disarmed
and must be reapplied before the next arming.
[6] + [ZONE NUMBERS] + [#]
(Press and hold down for 2 seconds) (01 to 16)
1. Enter and hold down [6] key for 2 seconds.
2. The P1 and KEYLOCK indicators will slow flash and keypad audible indicator will sound 2
beeps.
3. Press the zone number corresponding to the current bypassed zone.
4. To enter zone number more than 9, press button [F] to represent the ten’s digit.
5. E.g. To enter zone number 12, press [F] + [2], zone number 16 press [F] + [6].
6. Repeat step 3 to un-bypass other zones.
7. Press [#] key to exit the un-bypass mode and keypad audible indicator will sound 2 beeps
to confirm the command.
8. To unbypass all zones at once, enter [0] key followed buy [#].
9. Keypad audible indicator will sound 2 beeps to confirm the command and the system will
be back to normal mode.
10. The relevant ZONE indicator will extinguish to indicate that the zone is now active.
[7]
(Press and hold down for 2 seconds)
1. The system will monitor a number of possible trouble conditions. If one of these conditions
occurs, the SERVICE indicator will turn ON.
2. The SERVICE indicator will still be illuminated until the trouble is restored.
3. Enter and hold down [7] key for 2 seconds.
4. The SERVICE and KEYLOCK indicators will slow flash and keypad audible indicator will
sound 2 beeps.
5. One or more ZONE indicators will turn ON to indicate the troubles occur.
6. Press [#] key to exit and keypad audible indicator will sound 2 beeps.
indicator
AC Loss
indicator
Real Time Clock Loss (Program System Timer - refer to page 24)
indicator
Siren Fail
indicator
Battery Low Voltage
indicator
Telephone Line/GSM CMS Reporting Fail
Comentarios a estos manuales