version 1.1
13
b. Keypad Disarming
c. Remote Control Disarming
d. Timer Auto Disarming
e. Telephone Remote Disarm
For information on how to DISARM Partition system, please refer to PARTITIONING THE SYSTEM
at page 17.
[USER CODE] + [#]
1. To disarm the system, enter a valid 4-digit [USER CODE] followed by [#] key before expiry
of the entry delay time.
2. Enter the premises through a designated ENTRY/EXIT zone; entering via other zones will
trigger an alarm instantly.
3. The ENTRY delay begins once the ENTRY zone is violated.
4. The keypad audible indicator will sound for the duration of the ENTRY delay to indicate that
a valid user code is required.
5. If the P1 indicator remains illuminated, an error has been made while entering the user
code, press [∗
∗∗
∗] key and re-enter the user code.
6. Once the system is disarmed, the P1 indicator will extinguish and the keypad audible
indicator will stop.
7. If no valid user code has been entered by the end of the ENTRY delay period, an ALARM
condition will be registered and stored into the system MEMORY.
8. If programmed to do so, the keypad will be locked and non-responsive for a
preprogrammed period for certain number of incorrect user codes, which are entered
consecutively more than the keypad lock counter.
9. If the ENTRY delay is too short, have your installer to change the ENTRY delay period.
10. If the MEMORY indicator is flashing upon entry, there has been an intrusion. Call for
assistance. The intruder may still be inside.
1. To instantly disarm the system, press the remote control button or twist and release the
key-switch.
2. If the P1 indicator remains illuminated, press the remote control button or twist and release
the key-switch again.
3. The system will be disarmed instantly. The P1 indicator will extinguish and the keypad
audible indicator will sound 2 beeps to confirm the disarming.
4. If programmed to do so, the siren will sound briefly for this remote control disarming.
(Please refer to Installer Programming Section – System Option Setting).
1. Your system can be programmed to automatically DISARM itself according to a
programmed schedule.
REMOTE CONTROL DISARMING
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales